Galileo Discovery

Discover your speakers.

Galileo Discovery is our most evolved speaker cable with one of the most complex cable geometries perfected over 22 years and made by hand in our California factory from (4) High Current Silver Matrix geometries, (1) 4th Generation Tricon Silver Matrix geometry, (3) Hand Made Pure Silver / Graphene AirString Geometries and (1) Hand Made Pure Tungsten AirString geometry. All nine parallel geometries utilize our new UEF Graphene Matrix Shielding with a new UEF Graphene Compound first developed for our amazing SR Purple Fuses. To enhance clarity, all geometries and conductors are separated to cancel cable resonance for a clear, effortless sound with natural decay and timbre. During the voicing process, we added a Tungsten conductor in a hand-made AirString geometry for the unique sound staging properties of tungsten as determined during a 6-month double-blind listening test to find alternate conductors with remarkable properties.

For the clarity, speed, and holographic realism of our flagship SRX cable loom, we applied the SRXs UEF Graphene Compound to Galileo Discoverys UEF Inductive Cell located in a carbon fiber tube and made from Pure Silver Foils and Graphene with a dielectric of pure Japanese Silk, chosen for its warmth, sonic layering, and musicality over traditional dielectric materials discovered during double-blind listening tests.

To voice Galileo Discovery to your system, select between two bespoke UEF Tuning Modules first developed for our flagship SRX cable loom. The Silver SRX Tuning Module has a highly resolved balance that is pinpoint in its imaging and dynamic in presentation while possessing musicality absent in our previous Galileo Silver Tuning Module. The Gold SRX Tuning Module imparts a warmer frequency presentation with liquidity and envelopment without sacrificing detail. It merely presents differently, with slightly rounded image points, to the Silver SRXs sharper and more immediate focus. A third option is not to attach either UEF Tuning Module, and the choice is yours to make based on the option that sounds best in your system.

To improve shield effectivness you can star ground strategic Galileo Discovery cable shields to either an included ground option or for higher performance ground Galileo Discovery shields to an optional Galileo Active Ground Block.

Finally, to lower the noise floor, expand the soundstage, and increase detail and dynamics, we apply a brand new Long Duration, High Voltage, Multi-Frequency conditioning process first developed for our SRX cable loom and new Purple fuses. The net result is the most detailed, dynamic, holographic and musical Galileo loom to date.

Quantum Tunneling

SRX Long Duration High Voltage Conditioning.

After perfecting the most natural-sounding and holographic cables in our history, we set out to take them further with a new high voltage conditioning process that applies a sweeping frequency plot for an extended duration. We experimented with dozens of frequencies in different combinations over a prolonged time period before landing on just the right mix. We even built a new Tesla Coil to handle the excess heat generated during long conditioning sessions. Once finalized, the SRX conditioning process created holographic realism and timbrel accuracy far beyond our previous Tesla Coil conditioning protocol.

SRX Carbon Fiber Tuning Modules

Redefining Refinement.

To voice Galileo Discovery power cables to your system, we recommend you allow the cable loom to settle for at least 72 hours without tuning circuits before voicing each power cord separately. Then, start as high up the signal chain as possible, listening to your two tuning options and selecting the variant that makes music before voicing the next Galileo Discovery cable down the line. And when voicing with Galileo Discovery interconnects and speaker cables, start with a Silver UEF circuit on your speaker cables without comparing Gold to Silver options. Next, compare Gold to Silver on the interconnect pair as high up the signal chain as possible and select the option that sounds best to you. Now, voice each interconnect option Gold vs. Siver down the line until you arrive at your speaker cables. You will then compare the existing Silver circuit to the Gold UEF Tuning Circuit to arrive at a bespoke match perfect for your system. Lastly, voice your power cords Gold vs. Silver one at a time until all power cords have been voiced. As a rule, you will find one color, Gold or Silver, to sound best in most applications but with a few exceptions where the opposite color is your best fit. In this way, you achieve a custom balance perfect for your system. And should your system change in the future, you can reassess your voicing options to create the ideal match for new speakers and components without reconsidering your cable loom.

Geometry

Isolated 99.9999% pure silver geometries

Cable Tuning

How to use tuning modules.

SPECIFICATIONS