Product Features

#RemoteControlleronly-ForCameraswith10PinConnector

• For Cameras with a 10-Pin Connector
• Wirelessly Trigger Camera Shutter
• Also for Radio-Controlled Flash Units
• Trigger Using Separate WR-T10 or WR-1
• Can Trigger Up to 64 Transceiver Units
• Three Selectable Radio Channels

#RemoteControlleronly-ForCameraswithAccessoryTerminal

• For Cameras with an Accessory Terminal
• Wirelessly Trigger Camera Shutter
• Also for Radio-Controlled Flash Units
• Trigger Using Separate WR-T10 or WR-1
• Can Trigger Up to 64 Transceiver Units
• Three Selectable Radio Channels

#RemotecontrolertransmitterSet-ForCameraswith10PinConnector

• WR-T10 Wireless Remote Controller
• WR-R11a Remote Controller
• For Cameras with a 10-Pin Connector

#RemotecontrolertransmitterSet-ForCameraswithAccessoryTerminal

• WR-T10 Wireless Remote Controller
• WR-R11b Remote Controller
• For Cameras with an Accessory Terminal

In the Box

#RemoteControlleronly-ForCameraswith10PinConnector

• Nikon Remote Controller for Cameras with a 10-Pin Connector
• CR2032 3V Lithium Battery
• Strap

#RemoteControlleronly-ForCameraswithAccessoryTerminal

• Nikon Remote Controller for Cameras with an Accessory Terminal
• CR2032 3V Lithium Battery
• Strap

#RemotecontrolertransmitterSet-ForCameraswith10PinConnector

• Nikon WR-R11a Remote Controller
• Nikon WR-T10 Wireless Remote Controller Transmitter
• CR2032 3V Lithium Battery
• Strap

#RemotecontrolertransmitterSet-ForCameraswithAccessoryTerminal

• Nikon WR-R11b Remote Controller
• Nikon WR-T10 Wireless Remote Controller Transmitter
• CR2032 3V Lithium Battery
• Strap

Overview

#RemoteControlleronly-ForCameraswith10PinConnector

The WR-R11a is a Wireless Remote Controller that uses radio frequencies to wirelessly control the shutter release on Nikon cameras or radio-controlled flash units such as the SB-5000 Speedlight. The WR-R11a fits cameras with a 10 pin connector. The WR-R11a can be triggered by a WR-T10 Wireless Remote Controller (transmitter), a WR-1 Wireless Remote Controller; it can also be used on a designated master camera to trigger up to 64 transceiver units. Three radio frequency channels are available for use (5, 10, and 15) to prevent interference when multiple pairings or photographers are shooting in one location. Photographers can use the WR-T10 or WR-1 to simultaneously release the shutter on multiple cameras that have a WR-R11a unit attached and have been paired with the WR-T10/WR-1. Range (line of sight) from the WR-T10 to WR-R11a is 66 feet (20 meters). Range (line of sight) from WR-R11a (acting as a master unit) to WR-R10 or WR-11a/b units is 164 feet (50 meters). Regarding controlling Speedlights, the camera used must be able to support radio AWL (Advanced Wireless Lighting). Up to 18 Speedlights can be paired to the WR-R11a on the camera. Communication distance between the WR-R11a on the camera and the Speedlight is approx. 98 ft. (30 meters). The WR-11a comes with a small strap that can be used to connect the unit to the camera strap for convenience.

#RemoteControlleronly-ForCameraswithAccessoryTerminal

The WR-R11b is a Wireless Remote Controller that uses radio frequencies to wirelessly control the shutter release on Nikon cameras or radio-controlled flash units such as the SB-5000 Speedlight. The WR-R11b fits cameras with an accessory port. The WR-R11b can be triggered by a WR-T10 Wireless Remote Controller (transmitter), a WR-1 Wireless Remote Controller; it can also be used on a designated master camera to trigger up to 64 transceiver units. Three radio frequency channels are available for use (5, 10, and 15) to prevent interference when multiple pairings or photographers are shooting in one location. Photographers can use the WR-T10 or WR-1 to simultaneously release the shutter on multiple cameras that have a WR-R1b unit attached and have been paired with the WR-T10/WR-1. Range (line of sight) from the WR-T10 to WR-R11b is 66 feet (20 meters). Range (line of sight) from WR-R11b (acting as a master unit) to WR-R10 or WR-11a/b units is 164 feet (50 meters). When controlling Speedlights, the camera used must be able to support radio AWL (Advanced Wireless Lighting). Up to 18 Speedlights can be paired to the WR-R11b on the camera. Communication distance between the WR-R11b on the camera and the Speedlight is approx. 98 ft. (30 meters). The WR-11b comes with a small strap that can be used to connect the unit to the camera strap for convenience.

#RemotecontrolertransmitterSet-ForCameraswith10PinConnector

The WR-R11a/WR-T10 Remote Controller Set includes a WR-R11a Wireless Remote Controller and WR-T10 Wireless Remote Controller (transmitter) that use radio frequencies to wirelessly control the shutter release on Nikon cameras or radio-controlled flash units such as the SB-5000 Speedlight. The WR-R11a fits cameras with a 10 pin connector. The WR-R11a can be triggered by the WR-T10 Wireless Remote Controller (transmitter), a WR-1 Wireless Remote Controller; it can also be used on a designated master camera to trigger up to 64 transceiver units. Three radio frequency channels on the WR-R11a are available for use (5, 10, and 15) to prevent interference when multiple pairings or photographers are shooting in one location. The WR-T10 is a Wireless Remote Controller (transmitter) that is designed to work with the WR-R10 and WR-R11a/WR-R11b Wireless Remote Controllers (transceiver) to wirelessly control the shutter release on Nikon cameras. The WR-T10 and WR-R11a/b and WR-R10 units use radio frequencies to communicate; by pairing together a WR-T10 and one or more of the WR-R11a/b or WR-R10 units. Photographers can use the WR-T10 to simultaneously release the shutter on multiple cameras that have a WR-R11a/b or WR-R10 unit attached and have been paired with the WR-T10.

#RemotecontrolertransmitterSet-ForCameraswithAccessoryTerminal

The WR-R11b/ WR-T10 Remote Controller Set includes a WR-R11b Wireless Remote Controller and WR-T10 Wireless Remote Controller (transmitter) that use radio frequencies to wirelessly control the shutter release on Nikon cameras or radio-controlled flash units such as the SB-5000 Speedlight. The WR-R11b fits cameras with an accessory port. The WR-R11b can be triggered by the WR-T10 Wireless Remote Controller (transmitter), a WR-1 Wireless Remote Controller; it can also be used on a designated master camera to trigger up to 64 transceiver units. Three radio frequency channels on the WR-R11b are available for use (5, 10, and 15) to prevent interference when multiple pairings or photographers are shooting in one location. The WR-T10 is a Wireless Remote Controller (transmitter) that is designed to work with the WR-R10 and WR-R11a/WR-R11b Wireless Remote Controllers (transceiver) to wirelessly control the shutter release on Nikon cameras. The WR-T10 and WR-R11a/b and WR-R10 units use radio frequencies to communicate; by pairing together a WR-T10 and one or more of the WR-R11a/b or WR-R10 units. Photographers can use the WR-T10 to simultaneously release the shutter on multiple cameras that have a WR-R11a/b or WR-R10 unit attached and have been paired with the WR-T10.