The AT-VM95SH/H combo kit includes the AT-VM95SH dual moving magnet cartridge premounted on the AT-HS6BK headshell.
Features:
- VM dual magnet cartridge with 2.7 x 0.26 mil Shibata stylus
- Aluminum cantilever
- Specially wound coils increase output voltage
- Durable low-resonance polymer housing
- Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws no nuts or washers required
- Compatible with any AT-VMN95 replacement stylus
- Universal “-mount headshell for 4-pin turntable cartridges
Specifications
| Frequency Response |
20-25,000 Hz |
| Channel Separation |
23 (dB at 1 kHz) |
| Vertical Tracking Angle |
23 |
| Vertical Tracking Force |
1.8-2.2 g (2.0 g standard) |
| Stylus Construction |
Nude square shank |
| Recommended Load Impedance |
47,000 ohms |
| Coil Impedance |
3.3 k ohms (1 kHz) |
| DC Resistance |
485 ohms |
| Coil Inductance |
550 mH (1 kHz) |
| Output Voltage |
3.5 mV (1 kHz, 5 cm/sec.) |
| Output Channel Balance |
1.5 dB (1 kHz) |
| Stylus Shape |
2.7 x 0.26 mil Shibata |
| Cantilever |
Aluminum pipe |
| Static Compliance |
20 x 10 6 cm / dyne |
| Dynamic Compliance |
10 x 10 6 cm / dyne (100 Hz) |
| Mounting |
Half-inch |
| Dimensions |
Cartridge 17.2 mm (0.68″) H 18.9 mm (0.74″) W 28.3 mm (1.20″) D; Cartridge & Headshell 21.2 mm (0.83″) H 21.4 mm (0.84″) W 62.4 mm (2.46″) D |
| Accessories Included |
Two 11 mm installation screws, two 8 mm installation screws, two washers, nonmagnetic screwdriver |
| Mounting Feature |
Half-inch mount |
| Recommended Load Capacitance |
100 to 200 pF |
| Replacement Stylus |
AT-VMN95SH |
| Stylus Size |
2.7 x 0.26mil |
| Type |
VM Stereo Dual Magnet |
| Weight |
Cartridge 6.1 g (0.22 oz); Cartridge & Headshell 15.5 g (0.55 oz) |
| Wire Used for Coil |
T.P. Copper |
Reviews
There are no reviews yet.