This VM95 Series cartridge with 2.2 x 0.12 mil Microlinear stylus fits half-inch mount turntables. The cartridge offers excellent channel separation and low distortion for outstanding tonal quality. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli.
Features:
- VM Series dual magnet cartridge with 2.2 x 0.12 mil Microlinear stylus
- Aluminum cantilever
- Durable low-resonance polymer housing
- Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws no nuts required
- Compatible with any AT-VMN95 replacement stylus
Specifications
| Frequency Response |
20-25,000 Hz |
| Channel Separation |
23 (dB at 1 kHz) |
| Vertical Tracking Angle |
23 |
| Vertical Tracking Force |
1.8-2.2 g (2.0 g standard) |
| Stylus Construction |
Nude square shank |
| Recommended Load Impedance |
47,000 ohms |
| Coil Impedance |
3.3 k ohms (1 kHz) |
| DC Resistance |
485 ohms |
| Coil Inductance |
550 mH (1 kHz) |
| Output Voltage |
3.5 mV (1 kHz, 5 cm/sec.) |
| Output Channel Balance |
1.5 dB (1 kHz) |
| Stylus Shape |
2.2 x 0.12 mil Microlinear |
| Cantilever |
Aluminum pipe |
| Static Compliance |
20 x 10 6 cm / dyne |
| Dynamic Compliance |
10 x 10 6 cm / dyne (100 Hz) |
| Mounting |
Half-inch |
| Cartridge Weight |
6.1g |
| Dimensions |
17.2 mm (0.68″) H 18.9 mm (0.74″) W 28.3 mm (1.20″) D |
| Accessories Included |
Two 11 mm installation screws, two 8 mm installation screws, two washers, nonmagnetic screwdriver |
| Model |
AT-VM95ML |
| Mounting Feature |
Half-inch mount |
| Recommended Load Capacitance |
100 to 200 pF |
| Replacement Stylus |
AT-VMN95ML |
| Stylus Size |
2.2 x 0.12 mil |
| Type |
VM Stereo Dual Magnet |
| Weight |
6.1 g (0.22 oz) |
| Wire Used for Coil |
T.P. Copper |
Reviews
There are no reviews yet.